WebRelay-10™ is a robust, industrial relay board with Ethernet communications. It provides remote relay control through its ten large 30A relays.

The relays can be individually controlled using a standard web browser or by sending commands from a custom control application. It is self-contained with a built-in web server, and requires no external software, additional network modules, or computers.

WebRelay-10 is designed for industrial applications and can be DIN-Rail mounted inside a control cabinet. Tab connectors (1/4 inch) are used for power and relay contact connection.

WebRelay-10 Plus™
The full featured WebRelay-10 Plus has all the features found on WebRelay-10, plus much more. Additional features include an event scheduler, customizable email alerts, two discrete inputs, device logging, and remote temperature and/or humidity monitoring.499.95

 Features

WebRelay-10

    • Ten independent 30A Relays – SPDT (Form 1C).
    • Built-in web server for browser-based setup and control.
    • No special software or device drivers required.
    • XML status and control page make communications with custom computer applications simple.
    • Can operate as a Modbus/TCP slave.
    • On/Off and Pulse modes.
    • Wide power supply range (10-36 VDC).
    • DIN-Rail mountable.
    • LEDs indicate the current relay state.
    • 1/4-inch tab-connectors.
    • UL/CUL listed relays (E197852).

WebRelay-10 Plus

  • Event scheduler with yearly calendar. Schedule up to 100 events.
  • Customizable email alerts.
  • Up to 8 temperature and/or humidity sensors can be added for environmental monitoring (one temperature sensor included).
  • Dry-contact sensors or switches can be connected for local control of relays or for monitoring external devices.
  • Inputs can be used as counters.
  • Logging; log relay changes, events, Modbus requests, high/low temperatures, input changes, network traffic, and more.
  • Real-time clock, can automatically adjust for daylight savings time, sync with NTP server.
  • System log provides detailed diagnostic information.
  • Simple scripts can be written in BASIC for advanced functionality.
  • Configure manually or with DHCP.

Screen Shot 2017-01-23 at 8.54.57 PM