Call Us Today! Florida 813-947-1176 Puerto Rico 787-717-5511|info@arjsolutionsfl.com

Shop

/Shop/
  • Sale! analog_front_500px

    Analog Module

    $359.95 $259.95 $259.95
    Overview The Analog Module provides an accurate way to remotely monitor analog signals over an IP network. Using analog sensors (not provided), many real-world values such as position, water level, flow, voltage, current, etc., can be measured and viewed over an IP network using a web browser. Up to eight analog signals can be connected to the module. The Analog Module has a built-in web server which allows the inputs to be monitored with a web browser, XML formatted text, or Modbus/TCP. The Analog Module is fully configured in minutes using a web browser. No additional software is needed.

     Features

    • Connect up to eight analog signals
    • No programming required
    • Built-in web server
    • Configurable control and status web page
    • Email alerts
    • Modbus/TCP support
    • XML formatted status
    • Password protected
    • Selectable TCP ports
    • 12-pin removable terminal connector included
    • Rugged, DIN rail or wall mount Lexan enclosure
    • Wide power supply range 9-28VDC
    Screen Shot 2017-01-24 at 8.45.42 PM
  • Sale! five-input_front_500px

    Five-Input Module X-DAQ-5I-E

    $235.95 $140.95 $140.95
    Overview The Five-Input module is a robust, full-featured, Ethernet based data acquisition device with five optically-isolated discrete inputs. The state of the inputs can be monitored over the network using a web-browser, Modbus/TCP, SNMP, or XML formatted text. Each input can be used as an event counter capable of generating email messages when user-defined alarm conditions are met. In addition, the Five-Input Module can communicate peer-to-peer and trigger ControlByWeb relays located throughout the network. The Five-Input module is fully configured in minutes using a web browser. No additional software is needed.

    Features

    • No programming required
    • Built-in web server
    • Configurable input status web page
    • Modbus/TCP & SNMP support
    • XML formatted status
    • Email alarms
    • Built-in counters
    • Password protected
    • Optically isolated inputs
    • Selectable TCP ports
    • Loss of power flag
    • 14-pin removable terminal connector included
    • Rugged DIN rail or wall-mount Lexan enclosure
    • Input voltage: 4-26VDC
    • Counter Inputs: Inputs 1-5
    • Two power supply options available:
      • 9-28VDC
      • POE and/or 9-28VDC
    Screen Shot 2017-01-23 at 9.03.39 PM
  • Sale! five-input_front_500px

    Five-Input Module X-DAQ-5I-I

    $235.95 $140.95 $140.95
    Overview The Five-Input module is a robust, full-featured, Ethernet based data acquisition device with five optically-isolated discrete inputs. The state of the inputs can be monitored over the network using a web-browser, Modbus/TCP, SNMP, or XML formatted text. Each input can be used as an event counter capable of generating email messages when user-defined alarm conditions are met. In addition, the Five-Input Module can communicate peer-to-peer and trigger ControlByWeb relays located throughout the network. The Five-Input module is fully configured in minutes using a web browser. No additional software is needed.

    Features

    • No programming required
    • Built-in web server
    • Configurable input status web page
    • Modbus/TCP & SNMP support
    • XML formatted status
    • Email alarms
    • Built-in counters
    • Password protected
    • Optically isolated inputs
    • Selectable TCP ports
    • Loss of power flag
    • 14-pin removable terminal connector included
    • Rugged DIN rail or wall-mount Lexan enclosure
    • Input voltage: 4-26VDC
    • Counter Inputs: Inputs 1-5
    • Two power supply options available:
      • 9-28VDC
      • POE and/or 9-28VDC
    Screen Shot 2017-01-23 at 9.03.39 PM
  • Sale! temperature_front_500px

    Temperature Module X-DAQ-2R1-4T-E

    $253.95 $158.95 $158.95
    The Temperature Module provides an accurate way to remotely monitor temperatures over an IP network. It can be used for environmental temperature monitoring and simple control. Up to four digital temperature sensors can be connected and it has two internal relays that can be independently controlled. These relays can control devices such as alarm signals, heaters, fans, etc. The Temperature Module provides remote temperature monitoring and remote relay control using a standard web browser. Additionally, computers, PLCs, and automation controllers can communicate with the Temperature Module using XML formatted text, or Modbus/TCP. The unit can be configured to trigger relays or send email messages when a preset temperature is reached. It can even control relays in other ControlByWeb™ products located somewhere else on the network!

    Features

    • Connect up to four digital temperature sensors (one sensor included)
    • Temperature Measurement Range: -67°F to 257°F (-55°C to +125°C)
    • Two, independently controlled relays for controlling alarms and other devices
    • No programming required
    • Built-in web server
    • Configurable control and status web page
    • Email alerts when temperature crosses preset threshold
    • Modbus/TCP support
    • XML formatted status and control
    • Password protected
    • Selectable TCP ports
    • 14-pin removable terminal connector included
    • Rugged DIN rail or wall-mount enclosure
    • Power supply options:
      • 9-28VDC
      • POE Class 1 (0.44 to 3.84 Watt) or 5V±5%
    Screen Shot 2017-01-23 at 9.12.20 PM
  • Sale! temperature_front_500px

    Temperature Module X-DAQ-2R1-4T-I

    $253.95 $158.95 $158.95
    The Temperature Module provides an accurate way to remotely monitor temperatures over an IP network. It can be used for environmental temperature monitoring and simple control. Up to four digital temperature sensors can be connected and it has two internal relays that can be independently controlled. These relays can control devices such as alarm signals, heaters, fans, etc. The Temperature Module provides remote temperature monitoring and remote relay control using a standard web browser. Additionally, computers, PLCs, and automation controllers can communicate with the Temperature Module using XML formatted text, or Modbus/TCP. The unit can be configured to trigger relays or send email messages when a preset temperature is reached. It can even control relays in other ControlByWeb™ products located somewhere else on the network!

    Features

    • Connect up to four digital temperature sensors (one sensor included)
    • Temperature Measurement Range: -67°F to 257°F (-55°C to +125°C)
    • Two, independently controlled relays for controlling alarms and other devices
    • No programming required
    • Built-in web server
    • Configurable control and status web page
    • Email alerts when temperature crosses preset threshold
    • Modbus/TCP support
    • XML formatted status and control
    • Password protected
    • Selectable TCP ports
    • 14-pin removable terminal connector included
    • Rugged DIN rail or wall-mount enclosure
    • Power supply options:
      • 9-28VDC
      • POE Class 1 (0.44 to 3.84 Watt) or 5V±5%
    Screen Shot 2017-01-23 at 9.12.20 PM
  • Sale! webrelay-10plus_angle3_500px

    WebRelay-10

    $549.95 $449.95 $449.95
    WebRelay-10™ is a robust, industrial relay board with Ethernet communications. It provides remote relay control through its ten large 30A relays. The relays can be individually controlled using a standard web browser or by sending commands from a custom control application. It is self-contained with a built-in web server, and requires no external software, additional network modules, or computers. WebRelay-10 is designed for industrial applications and can be DIN-Rail mounted inside a control cabinet. Tab connectors (1/4 inch) are used for power and relay contact connection. WebRelay-10 Plus™ The full featured WebRelay-10 Plus has all the features found on WebRelay-10, plus much more. Additional features include an event scheduler, customizable email alerts, two discrete inputs, device logging, and remote temperature and/or humidity monitoring.499.95

     Features

    WebRelay-10

      • Ten independent 30A Relays - SPDT (Form 1C).
      • Built-in web server for browser-based setup and control.
      • No special software or device drivers required.
      • XML status and control page make communications with custom computer applications simple.
      • Can operate as a Modbus/TCP slave.
      • On/Off and Pulse modes.
      • Wide power supply range (10-36 VDC).
      • DIN-Rail mountable.
      • LEDs indicate the current relay state.
      • 1/4-inch tab-connectors.
      • UL/CUL listed relays (E197852).

    WebRelay-10 Plus

    • Event scheduler with yearly calendar. Schedule up to 100 events.
    • Customizable email alerts.
    • Up to 8 temperature and/or humidity sensors can be added for environmental monitoring (one temperature sensor included).
    • Dry-contact sensors or switches can be connected for local control of relays or for monitoring external devices.
    • Inputs can be used as counters.
    • Logging; log relay changes, events, Modbus requests, high/low temperatures, input changes, network traffic, and more.
    • Real-time clock, can automatically adjust for daylight savings time, sync with NTP server.
    • System log provides detailed diagnostic information.
    • Simple scripts can be written in BASIC for advanced functionality.
    • Configure manually or with DHCP.
    Screen Shot 2017-01-23 at 8.54.57 PM
  • Sale! webrelay-10plus_angle3_500px

    WebRelay-10 Plus

    $549.95 $449.95 $449.95
    WebRelay-10™ is a robust, industrial relay board with Ethernet communications. It provides remote relay control through its ten large 30A relays. The relays can be individually controlled using a standard web browser or by sending commands from a custom control application. It is self-contained with a built-in web server, and requires no external software, additional network modules, or computers. WebRelay-10 is designed for industrial applications and can be DIN-Rail mounted inside a control cabinet. Tab connectors (1/4 inch) are used for power and relay contact connection. WebRelay-10 Plus™ The full featured WebRelay-10 Plus has all the features found on WebRelay-10, plus much more. Additional features include an event scheduler, customizable email alerts, two discrete inputs, device logging, and remote temperature and/or humidity monitoring.499.95

     Features

    WebRelay-10

      • Ten independent 30A Relays - SPDT (Form 1C).
      • Built-in web server for browser-based setup and control.
      • No special software or device drivers required.
      • XML status and control page make communications with custom computer applications simple.
      • Can operate as a Modbus/TCP slave.
      • On/Off and Pulse modes.
      • Wide power supply range (10-36 VDC).
      • DIN-Rail mountable.
      • LEDs indicate the current relay state.
      • 1/4-inch tab-connectors.
      • UL/CUL listed relays (E197852).

    WebRelay-10 Plus

    • Event scheduler with yearly calendar. Schedule up to 100 events.
    • Customizable email alerts.
    • Up to 8 temperature and/or humidity sensors can be added for environmental monitoring (one temperature sensor included).
    • Dry-contact sensors or switches can be connected for local control of relays or for monitoring external devices.
    • Inputs can be used as counters.
    • Logging; log relay changes, events, Modbus requests, high/low temperatures, input changes, network traffic, and more.
    • Real-time clock, can automatically adjust for daylight savings time, sync with NTP server.
    • System log provides detailed diagnostic information.
    • Simple scripts can be written in BASIC for advanced functionality.
    • Configure manually or with DHCP.
    Screen Shot 2017-01-23 at 8.54.57 PM
  • Sale! webrelay-quad_front_500px

    WebRelay-Quad™ X-WR-4R3-I

    $199.95 $133.95 $133.95
    WebRelay-Quad™ is used by many different companies for hundreds of applications including industrial control, security, remote control, remote reset, and many other applications that require remote relay control. It has four low-signal relays that can individually switch up to 3 Amp at 28V. Each relay can be turned on, off, or pulsed remotely using the built-in web pages or by running custom scripts from a computer or dedicated controller. It is extremely versatile and can be made to fit almost any remote relay control application. The WebRelay-Quad is fully configured in minutes using a web browser. No additional software is needed.

     Features

    • Built-in web server for setup and remote relay control from a web-browser
    • No special software or device drivers required
    • XML status and control page makes communications with custom software interfaces simple
    • Can operate as a Modbus/TCP slave device
    • Four independent, 28VAC, 24VDC, 3A relays SPDT (Form 1C)
    • ON/OFF or Pulse relay modes
    • Rugged, compact enclosure can be DIN-Rail or Wall mounted
    • Includes a 2-piece (14-pin) industrial terminal connector that makes connections convenient
    • Power supply options:
      • 9-28VDC
      • POE Class 1 (0.44 to 3.84 Watt) or 5V±5%
    Screen Shot 2017-01-23 at 6.59.56 PM
  • Sale! webrelay-quad_front_500px

    WebRelay-Quad™X-WR-4R3-E

    $199.95 $138.95 $138.95
    WebRelay-Quad™ is used by many different companies for hundreds of applications including industrial control, security, remote control, remote reset, and many other applications that require remote relay control. It has four low-signal relays that can individually switch up to 3 Amp at 28V. Each relay can be turned on, off, or pulsed remotely using the built-in web pages or by running custom scripts from a computer or dedicated controller. It is extremely versatile and can be made to fit almost any remote relay control application.

    Features

    • Built-in web server for setup and remote relay control from a web-browser
    • No special software or device drivers required
    • XML status and control page makes communications with custom software interfaces simple
    • Can operate as a Modbus/TCP slave device
    • Four independent, 28VAC, 24VDC, 3A relays SPDT (Form 1C)
    • ON/OFF or Pulse relay modes
    • Rugged, compact enclosure can be DIN-Rail or Wall mounted
    • Includes a 2-piece (14-pin) industrial terminal connector that makes connections convenient
    • Power supply options:
      • 9-28VDC
      • POE Class 1 (0.44 to 3.84 Watt) or 5V±5%
    Screen Shot 2017-01-23 at 6.59.56 PM
  • Sale! webrelay_front_500px

    WebRelay™

    $158.95 $108.95 $108.95
    WebRelay, can provide remote relay control in countless applications including pump and motor control, security lock systems, remote reboot, and lighting control. WebRelay's powerful and flexible design make imagination its only limit. WebRelay also has an optically isolated input that can be used to monitor the state of devices, control the relay, or control a remote relay somewhere else on the network. This feature is useful to extend the output of a PLC to another building or to allow a switch to control a device in another state.

    Features

    • No programming required
    • Full control using a standard web browser or text-based XML messages
    • Can operate as a Modbus/TCP slave
    • Password protected
    • 12A relay contacts
    • ON/OFF or Pulsed relay modes
    • Optically-isolated input uses:
      • Monitoring
      • Relay control
      • Remote relay control (peer-to-peer)
    • Auto-Reboot controller mode for remote reboot of network devices
    • Selectable TCP ports
    • Removable terminal connectors included
    • DIN rail or wall-mount
    • Power supply options: 9-28VDC -- POE Class 1 (0.44 to 3.84 Watt) or 5V±5%
    • Five-Year Warranty
     
  • Sale! webswitch_front_500px

    WebSwitch XRDI-WS3-IN

    $294.95 $194.95 $194.95
    Overview WebSwitch™ Remote Power Switch, is the ideal solution for remote power control, remote reboot, and automatic reboot of network devices using a standard web-browser. WebSwitch has two power outlets which can be independently controlled, making it easy to automatically power cycle multiple devices, or manually turn devices on/off. WebSwitch has two power outlets which can be independently controlled over an IP network using a web browser on a computer or smartphone. It is completely self-contained and includes a built-in web server, so no external servers, or monthly subscriptions are required. Remote Control and Auto Reboot Applications Servers, computers, routers, and other electrical devices can use WebSwitch as a remote control outlet that provides remote power control and/or automatic reboot of these devices. Features WebSwitch Control using a standard web browser...no special software required. Automatic reboot - Use to reboot devices when ping responses fail. Manual remote reboot Built-in web server provides direct access to device...no external servers, services or subscriptions required. Supports HTTP, SNMP, and Modbus/TCP. "Remote Services" can be used to initiate connection with external servers. Password protection. IP filter provides simple firewall. Selectable TCP Ports. 10/100 Mbps Ethernet connectivity. Field re-programmable; install firmware updates when available. Attractive, rugged enclosure made of flame resistant plastic. Operates worldwide (100-240V AC; 50/60Hz). Wall mountable or optional rack mounting kit available. WebSwitch Plus Temperature and/or humidity sensors can be added for environmental monitoring. Dry-contact sensors or switches can be connected for local control of outlets or for monitoring external devices. Real-time clock, can automatically adjusts for daylight savings time, sync with NTP server. Added relay contact protection. Event scheduler with yearly calendar. Customizable email alerts. Logging - Log outlet changes, automatic reboots, high/low temperatures, network traffic, and more. System log provides detailed diagnostic information. Simple scripts can be written in BASIC for advanced functionality. Configure manually or with DHCP. RoHS compliant Made in the USA Screen Shot 2017-01-24 at 9.05.20 PM
  • Sale! webswitch_front_500px

    WebSwitch XRDI-WS3-NA

    $299.95 $199.95 $199.95
    Overview WebSwitch™ Remote Power Switch, is the ideal solution for remote power control, remote reboot, and automatic reboot of network devices using a standard web-browser. WebSwitch has two power outlets which can be independently controlled, making it easy to automatically power cycle multiple devices, or manually turn devices on/off. WebSwitch has two power outlets which can be independently controlled over an IP network using a web browser on a computer or smartphone. It is completely self-contained and includes a built-in web server, so no external servers, or monthly subscriptions are required. Remote Control and Auto Reboot Applications Servers, computers, routers, and other electrical devices can use WebSwitch as a remote control outlet that provides remote power control and/or automatic reboot of these devices. Features WebSwitch Control using a standard web browser...no special software required. Automatic reboot - Use to reboot devices when ping responses fail. Manual remote reboot Built-in web server provides direct access to device...no external servers, services or subscriptions required. Supports HTTP, SNMP, and Modbus/TCP. "Remote Services" can be used to initiate connection with external servers. Password protection. IP filter provides simple firewall. Selectable TCP Ports. 10/100 Mbps Ethernet connectivity. Field re-programmable; install firmware updates when available. Attractive, rugged enclosure made of flame resistant plastic. Operates worldwide (100-240V AC; 50/60Hz). Wall mountable or optional rack mounting kit available. WebSwitch Plus Temperature and/or humidity sensors can be added for environmental monitoring. Dry-contact sensors or switches can be connected for local control of outlets or for monitoring external devices. Real-time clock, can automatically adjusts for daylight savings time, sync with NTP server. Added relay contact protection. Event scheduler with yearly calendar. Customizable email alerts. Logging - Log outlet changes, automatic reboots, high/low temperatures, network traffic, and more. System log provides detailed diagnostic information. Simple scripts can be written in BASIC for advanced functionality. Configure manually or with DHCP. RoHS compliant Made in the USA Screen Shot 2017-01-24 at 9.05.20 PM